Simpson Strong-Tie ITS2.37/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.37/9.5 installs 2-5/16 x 9-1/2 I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost.
Simpson Strong-Tie ITS2.37/11.88 Its Joist Hanger
MiTek® 2-1/4 - 2-5/16 x 9-1/2 G90 Steel Top Flange Joist Hanger
This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. The BA features minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads.
Simpson BA3.56/16 3-1/2 inchx16 inch Top Flange I-Joist Hanger
Simpson DU/DHU Face Mount Drywall Hangers – tagged Joist_Size:3-1
IUS/MIU I-Joist Hangers - Tropical Construction Supply
MiTek® 2-1/4 - 2-5/16 x 9-1/2 G90 Steel Top Flange Joist Hanger
Simpson I-joist & Structural Composite Lumber Hangers – Fasteners Plus
Simpson BA3.56/9.5 Top Flange I-Joist Hanger - G90 Galvanized
Simpson Strong Tie HIT418 Top Flange 3-1/2 x 18 I-Joist Hangers
BPH SERIES - MiTek Residential Construction Industry
Simpson Strong Tie ITS3.56/11.88 Top Flange I-Joist Hangers
Simpson Strong Tie HU44TF 4 x 4 Top Flange Joist Hanger
The JBA is a top-flange hanger for solid sawn lumber applications. This cost-effective hanger is designed to support light-to-medium loads while providing uplift. The JBA also features optional triangular nail holes for maximum nailing to increase allowable loads.
Simpson Strong-Tie Jb212a - Galvanized Top-Flange Hanger for 2x12